name

quantity

remarks

Hydraulic reel stand

5 set

1.Multi-point brake, hydraulic drive lift, left and right translation, medium.

2.The guide rail length 6000 mm, the trolley adopts 10 mm medium plate welding.

Paper bike

10set

Single Paper preheating machine

4set

Roller ¢800 mm,including pressure vessel certificate. Electric adjustment package angle. The wrapping angle can adjust the heating area of paper within 360 range

Adsorption Single facer machine

2set

Corrugated main roller ¢320 mm,material using tungsten carbide. Imported main bearing,PLC automatic glue control,man-machine interface touch screen,paper break automatic stop pressure relief,steam heating mode

Triples preheating machine

1set

Roller ¢800 mm,including pressure vessel certificate. Electric adjustment package angle. The wrapping angle can adjust the heating area of the paper in the range of 360.

Double gluing Machine

1set

Cots 268 mm. diameter Each layer of independent frequency conversion motor drive, PLC adjust the glue clearance and man-machine interface.

Transport Bridge

2set

Main beam 200 mm channel steel, independent frequency conversion motor drive paper transfer, adsorption tensioning. Electric correction

Double sided  machine

1set

The frame 400 mm national standard channel steel,chromium plating hot plate 600 mm *14 block,the entrance ¢mm hot cylinder causes the surface paper to raise the temperature extremely fast 6 groups to touch the whole process pressure plate design structure. PLC automatic control pressure plate. Temperature display,frequency conversion motor.400

Type electric slitter scorer  machine

1set

10 scourer and 6 slitter

Tungsten alloy blade, six-knife ten-wire type, electric row knife, electric lift left and right movemen

Computer NC-cut off machine

1set

Full AC Servo Control, Energy Storage Brake, Spiral Knife Structure, Oil-immersed Gear Drive

Sheet transfer conveyor system

1set

Imported high strength belt output, paper side standard conveyor

Rubber station system

1set

Pipeline customer self-provided. The device consists of carrier tank, main tank, storage tank, rubber pump and rubber pump.

 Air supply system

1set

Steam components including piping valves, trap valves, meters, etc. in equipment, customer-owned heat source and piping

Electrical control cabinet system

1set

Electronic control system: adsorption single-sided machine, driving part, electric thin knife machine, double-sided machine, glue coating machine all adopt frequency conversion motor, Delta frequency conversion control system. The operation interface is simple and convenient, the speed display control cabinet is equipped with each unit speed display, the unit calls, the emergency stop function.

 The main relay adopts French Schneider famous brand products.

 vapour system

1 set

Steam components including piping valves, trap valves, meters, etc. in equipment, customer-owned heat source and piping

Maximum production

1400mm

Design Production Speed

180m/min

Three-tier working

100-150m/min

Five-tier working

80-120m/min

Precision of Longitudinal Cutting Paper

mm ±1

Cross cutting accuracy

mm ±1

The above speed index shall be up to: production width of 1400 mm, meet the following paper standards and ensure that the surface temperature of the heated parts of the equipment is 175℃. Table 2

Surface paper indicators

g/㎡100-180 g/㎡ ring pressure index (N.m/g)≥8(moisture content 8-10%) g/㎡100-180≥(N.m/g)

Core paper indicators

g/㎡80-160 g/㎡ ring pressure index (N.m/g)≥5.5(moisture content 8-10%) g/㎡80-160 g/㎡(N.m/g),5.5(moisture content 8-10%)

 Paper finger

g/㎡90-160 g/㎡ Ring pressure index (N.m/g)≥6(moisture content 8-10%) g/㎡90-160 g/㎡(N.m/g)6(moisture content 8-10%)

Flute type combination

Steam requirements

 maximum pressure16kg/cm2

wirking pressure 10-12kg/cm2

 dosage4000kg/Hr

 Electricity

AC380V 50Hz 3PH

Installed capacity ≈250 KW

The common power ≈150 KW

 compressed air

9 kg/cm2 maximum pressure

Common pressure kg/cm2 4-8

Amount m3/min 1

 space usage

≈Lmin85m*Wmin10m*Hmin5m

Main Name

producing area

Material Type

 main axle

 Tin Steel Production

 242mm diameter

 swing arm

 Production

 HT200Resin sand cast iron

 wallboard

 Jigang

Q235A Welded Parts

 bearing

Ha, Wa, Lo

Tooth paper clip

Xu Sheng, Zhejiang

3.4 inches

Main electrical appliances

 France Schneider

 push-button

Zhengtai NP2 Series

 air switch

France Schneider

 pneumatic component

Sonno, Zhejiang

 hydraulic pressure station

Shandong Zaozhuang

 Brake pump

 Zhejiang

Main Name

Brand or origin

Material Type

Track and Paper Truck

Tanggang or Jigang

14 channel, Q235A、 steel

 bearing

Ha, Wa, Lo