精選產品
聯絡資訊
Yuning Industrial Zone, Hengli Town
電話：86-769-82181987
傳真：86-769-82181957
High Speed Robot
產品型號：HSR-01
產品特色
Features:
- Applicable to high speed injection machine ranging from 100 ton to 500 ton for products take-out
- Vertical arm is telescopic type, with product arm, for two plate mold products take-out.
- Minimum take-out time of inside mold: 0.6s
- Dry cycle time: 3.8s
- Widely used in thin-walled box disposable cutlery industry
X-, Y-, Z-axis are driven by AC servo motor, can realize products stacking up on any points inside the mold, as well as at X, Y, Z directions, can cut the runner by scissors driven and inset or embed the accessory by the cylinder.
產品規格
Plastic Injection Molding Robot Provider Offers High Speed Plastic Injection Molding Robot, Double-rail Design, for Machines Ranging from 100 to 500 Ton
Advantages:
- Crosswise type
- Aluminum alloy double-rails design
- Lightweight
- High bending strength
- Long service life
- The traverse guide rail installs manual lubrication system, so it is convenient to maintain.
| Model | A | B | C | D | E | F | G | H | I | J | K | L |
| RG-800WS(S3) | 1300 | \ | 496 | 1390 | 165 | 185 | \ | 200 | \ | 350 | 1450 | 2140 |
| RG-900WS(S3) | 1310 | 496 | 1390 | 165 | 185 | 1450 | 2140 | |||||
| RG-1100WS(S3) | 1400 | 516 | 1425 | 225 | 245 | 1700 | 2380 |
| Model | Applied to injection molding machine (ton) | Travel (mm) | Side posture angle (degree) | Max load (including fixture) | Time (sec) | Driven way | Working pressure (kgf/cm2) | Air consumption (nl/cycle) | Power | Power consumption | NW (kg) | |||
| up and down | pull out | cross traveling | take-out | empty loop | ||||||||||
| RG-800WS(S3) | 150-280 | 800 | 550 | 1450 | 90 | 5 | 0.7 | 5.8 | x, y, z AC servo motor | 5-7 | 8 | AC220±10V 50/60HZ | 2.5 | 230 |
| RG-900WS(S3) | 200-350 | 900 | 550 | 1450 | 0.8 | 6 | 240 | |||||||
| RG-1100WS(S3) | 350-550 | 1100 | 660 | 1700 | 0.8 | 6 | 250 | |||||||
精選產品
