精選產品

 

• 其它未分類之木工機械設備 (3)
• 木工機械零組件 (3)
• 其他 (1)
• 木工車床 (1)
• 工業用機器人及週邊設備 (1)
• 其他 (1)

 

聯絡資訊

 

立即線上詢問

 

Shuntai Square No 2000, Shunhua Road Jinan City China 250101

電話：86-531-81956896

傳真：86-531-81958187

...更多資訊

 

• 首頁
• 精選產品
• 57BYGH311-01 Hybrid Stepping Motor 1.8 Degree 2 Phase Stepper Motor for CNC Router

 

57BYGH311-01 Hybrid Stepping Motor 1.8 Degree 2 Phase Stepper Motor for CNC Router

 

產品型號：57BYGH311-01

產品分類：木工產業機械 / 木工機械零組件 / 木工機械零組件

 

立即線上詢問

 

 

產品特色

 

http://www.qingonggroup.com/products/115-57BYGH311-Hybrid-Stepping-Motor-1.8-Degree-2-Phase.html

Hybrid Stepping Motor 1.8 Degree 2 Phase Stepper Motor for CNC Router
Model: 57BYGH311-01

Stepping motors are commonly recommended for applications that are cost-sensitive and low maintenance. Steppers provide stability and flexibility. This stepping motor is a hybrid stepping motor for cnc router machine movement driving.

A stepper motor is a brushless, synchronous electric motor that converts digital pulses into mechanical shaft rotation.
Every revolution of the stepper motor is divided into a discrete number of steps, in many cases 200 steps, and the motor must be sent a separate pulse for each step. The stepper motor can only take one step at a time and each step is the same size. Since each pulse causes the motor to rotate a precise angle, typically 1.8°, the motor's position can be controlled without any feedback mechanism. As the digital pulses increase in frequency, the step movement changes into continuous rotation, with the speed of rotation directly proportional to the frequency of the pulses. Step motors are used every day in both industrial and commercial applications because of their low cost, high reliability, high torque at low speeds and a simple, rugged construction that operates in almost any environment.

There are three basic types of step motors: variable reluctance, permanent magnet, and hybrid.

Standard hybrid stepping motors have 200 rotor teeth, or 200 full steps per revolution of the motor shaft. Dividing the 200 steps into the 360° of rotation equals a 1.8° full step angle. Normally, full step mode is achieved by energizing both windings while reversing the current alternately. Essentially one digital pulse from the driver is equivalent to one step.
The stepper motor driver receives step and direction signals from the indexer or control system and converts them into electrical signals to run the step motor. One pulse is required for every step of the motor shaft. In full step mode, with a standard 200-step motor, 200 step pulses are required to complete one revolution. The speed of rotation is directly proportional to the pulse frequency.

Standard hybrid motors have 200 rotor teeth and rotate at 1.8º step angles. Because they exhibit high static and dynamic torque and run at very high step rates, hybrid step motors are used in a wide variety of commercial applications including computer disk drives, printers/plotters, and CD players. Some industrial and scientific applications of stepper motors include robotics, cnc engraving machine, cnc laser cutting machine, plasma cutting machine, machine tools, pick and place machines, automated wire cutting and wire bonding machines, and even precise fluid control devices.

 

精選產品