精選產品

聯絡資訊

立即線上詢問

Shuntai Square No 2000, Shunhua Road Jinan City

電話：86-531-81956896

傳真：86-531-81958187

...更多資訊

首頁
精選產品
HSD ISO30 ER32 Tool Holders with Covernut and Retainer Knob

放大圖片

HSD ISO30 ER32 Tool Holders with Covernut and Retainer Knob

產品型號：ISO30-ER32-42L

產品分類：木工產業機械 / 木工機械零組件 / 木工機械零組件

立即線上詢問

產品特色

Features:
Collet Chuck accepts all ER32 collets
Works on all machines that take ISO30 tooling
All critical surfaces precision ground
Made from alloy steel hardened to 54 - 56rc
Balanced to 30,000 rpms
Concentricity is less than .0001 at collet face
Rear thread for pull stud for HSD ATC spindle
Gage length is 42mm
Tool holder model: ISO30ER32-42

產品規格

HSD ISO30 ER32 Tool Holders with Covernut and Retainer Knob

Description:

This is a balanced ISO 30 tool holder (cone) that is used for ISO 30 taper systems. All HSD ISO 30 ATC spindles use this cone. The HSD Auto Tool Changer clamping system uses the pull stud at the end to pull the cone precisely into the spindle’s taper.

ISO30 ER32 Toolholder, A=50mm. Commonly known as ISO30 for many HSD equipped CNC routers. Balanced to 30,000 rpm ≦G2.5, includes HSD pull stud and ER32 collet nut.

Features:

Collet Chuck accepts all ER32 collets

Works on all machines that take ISO30 tooling

All critical surfaces precision ground

Made from alloy steel hardened to 54 - 56rc

Balanced to 30,000 rpms

Concentricity is less than .0001 at collet face

Rear thread for pull stud for HSD ATC spindle

Gage length is 42mm

Tool holder model: ISO30ER32-42

Application: ATC cnc center /cnc router/cnc woodworking engraving machine

HSD ISO30 ER32 Tool Holder with Retention Knobs and covernut

Covernuts are used to hold and clamp tools into a spindle. Spindles operate at speeds up to 24,000 RPM so it is vital that balanced covernuts are used. Tool holders (also called “Cones”) are used in ATC style systems. All tool holders and covernuts on this website are balanced.

Using unbalanced covernuts or tool holders will damage the spindle.

Correct installation of the collet and tool is required to avoid damaging tooling, cones, and spindles.

More model ISO30 tool holders:

Model NO	Tool holding Capacity (mm)	Diameter of Clamping Nut	Collet	Wrench
ISO30-ER16-60M/MS	0.5-10	22	ER16	ER16
ISO30-ER20-60M/MS	1-13	28	ER20	ER20
ISO30-ER25-60	1-13	42	ER25	ER25
ISO30-ER32-42	2-20	50	ER32	ER32
ISO30-ER32-60	2-20	50	ER32	ER32
ISO30-OZ25-60	3-25	60	OZ-25	OZ-25
SK30-ER40-60	4-26	63	ER40	ER40

Nut and Pull Stud is Included

Collets Not Included-Click Here for Collet Selections

Page Top

供應商等級

精選產品

聯絡資訊

放大圖片

HSD ISO30 ER32 Tool Holders with Covernut and Retainer Knob

產品特色

產品規格

精選產品