產品規格

•Series interface: Half duplex RS-485 with transformer isolation
•Cable type: CAT5 UTP/STP Ethernet cable
•Surge protection: 10KV
•Transmission speed: 2.5Mbps,5Mbps,10Mbps and 20Mbps
•Programmable Pulse output mode: ±OUT/DIR, ±CW/CCW, ±A/B phase
•Programmable pulse command speed: Max 6.5Mpps / Min 0.05pps
•Position range: 28 bits (±134,217,728 pulses)
•Home return mode: 13 types
•Velocity profiles: T-curve, S-curve
•Counter for encoder feedback signals: 28bits up/down
•Position latch input: LTC
•Position compare output: CMP
•Incremental encoder input: ±EA, ±EB
•Encoder index signal input: ±EZ
•Machine interface: PEL, MEL, ORG, SLD
•Servo driver interface: ALM, RDY, SVON, INP, ERC
•Simultaneous start/stop motion input: STA, STP
•LED indicator: PWR, RUN, ERR, PEL, MEL, ORG, SLD
•Power supply: +18V DC to +30V DC, consumption: 3W typical
•Working temperature: 0 to 60℃

•106-M1A1-DA2S0
1-Axis motion slave module for Delta A2 series driver
•106-M131-MJ3S0
1-Axis motion slave module for Mistubishi J3 Series driver
•106-M141-YS5S0
1-Axis motion slave module for Yaskawa Sigma-II/Ⅴservo driver
•106-M151-PMAS0
1-Axis motion slave module for Panasonic Minas A/A4/A5 Series servo driver
•106-M161-GENS0
1-Axis motion slave module for Servo or Stepping driver
•CAB-S1133-500C，CAB-S1133-101C，CAB-S1133-201C
SCSI 50 pins cable, 0.5m/1m/2m length
•CAB-S2331-500D，CAB-S2331-101D，CAB-S2331-201D
SCSI 50 – 2* SCSI 20pins cable, 0.5m/1m/2m length (106-M151-PMA for Mistubishi J2S Series Driver)