展覽簡介
展覽日期:2013/1/7-2013/1/10
展覽地點:
杜拜世貿中心展覽館
主辦單位:
Al Fajer Information & Services
Messe Dussedolf
中華民國展覽暨會議商業同業公會
指導單位: 經濟部國貿局
執行單位: 翔和展覽有限公司
精選廠商
- 瑋禮企業股份有限公司 Booth No : -
PET Bottle Making Machine
產品型號:CMA-D4
產品分類:塑橡膠產業機械 / 塑膠機械 / 寶特瓶拉吹機
供應商:嘉明機械股份有限公司
攤位號碼:-
產品特色
This is a new generation of fully automatic and versatile machine for mass production of PET bottles with volumes up to approximately 600ml. Ideally suitable for large scale factoris and for applications where stringent quality requirements have to be met. Substantial reduction in operating cost is achieved by saving of manpower.
-Preform Infeed and Unscrambler
Orientation and delivery of preforms is in an orderly fashion to the machine. Accurate position control of preform is achieved by pneumatic system.
-Bottle Discharge System
Bi-axially oriented bottles from the moulds are picked up by robotic arms and placed in an upright position on an optional in-line conveyor or leak testing systems.
-Preform Heating
Accurate temperature control of infrared heaters in various zones of the oven is achieved by electronic control. Rotation of preform holding mandrels enables the circumference of preform at ach zone to be evenly heated.
-Human Machine Interface, Touch Screen Control System
Computer touch screen communicates with the PLC. All actions of the machine can be seen on the screen. System has many sets of memories. The system diagnoses and displays the problems on the scren to make trouble shooting easier.
產品規格
Model: CMA-D4
Container:
-Max. neck diameter: 25~33mm
-Max. production capacity: 4000pcs/hr.
-Max. body diameter: 65mm
-Max. container height: 250mm
-Max. bottle capacity: 600ml
-No. of cavity: 4
Mould:
-Carry pitch: 76.2mm
-Mould center distance: 76.2mm
-No. of preform mandrels: 64pcs
Heating oven:
-No. of oven: 2
-No. of infrared heaters in each oven: 6
-Heating load (max.): 20kw
Air pressure:
-Low pressure: 7kg/cm2
-High prressure: 35kg/cm2
Cooling water:
-Cooliing capacity: 18000kcal/h
-Water consumption: 80L/min
-Water temperature: 10~12 degree of Centigrade
-Pressrue: 5bar
Total consumption power: 22kw
Machine dimension: 2.7*1.85*2.2m
Machine weight: 3ton
All specifications and designs are subject to change without notice.
精選產品
-
Roll-On Ball Project
-
Extrusion Blow Molding Machine
-
Blow Molding Machine
-
Blow Moulding Machine
-
PET Blow Moulding Machine
-
PET Bottle Making Machine
-
PET Stretch Blow Molding Machine