精選產品
- 檢測、量測設備及其另件 (10)
聯絡資訊
No.3 Upgrade Demonstration Base, West of Yongchang Rd.
電話:029-381-28695
傳真:--
KRD11 Pneumatic Vertical Shock Test System
產品型號:KRD11
產品分類:自動化設備/產業機械 / 檢測設備 / 檢測、量測設備及其另件
產品特色
KRD11 series pneumatic vertical shock test system is suitable for evaluating the functional reliability and structural integrity of various products under shock or bump environments, thereby improving or optimizing the structural design or layout of the products. The system meets the requirements of both shock and bump test, can perform conventional half-sine wave, post-peak sawtooth wave, trapezoid wave and other waveform shock tests.
Pneumatic drive, simple structure and high reliability
Pollution free, without hydraulic leak risk and keep the environment clean.
Pneumatic drive greatly improves the shock test efficiency, maximum shock rate up to 120 times/ min.
It can easily realize large pulse width and small overload test.
With a fast shock rate comparing to motor or hydraulic driven table, it has higher reliability and better bump waveform.
The speed and rate of shock can be easily controlled by adjusting the gas pressure.
IPS-2000 shock control and measurement system can perform manual shock, continuous shock, single shock, and interval shock.
Built-in brake mechanism ensures the safety of operation in any situation.
Foundation-free, the cement floor shall be leveled and the working distance of 800 ~ 1000mm shall be reserved around the equipment
產品規格
Model Parameters |
KRD 11-5 |
KRD 11-15 |
KRD 11-25 |
KRD 11-50 |
KRD 11-100 |
KRD 11-200 |
KRD 11-400 |
KRD 11-600 |
KRD 11-800 |
KRD 11-1000 |
KRD 11-2000 |
|
Rated Load (kg) |
5 |
15 |
25 |
50 |
100 |
200 |
400 |
600 |
800 |
1000 |
||
Table Size (mm) |
150×150 |
200×200 |
300×300 |
500×500 |
600×600 |
800×600 |
800×800 |
1000×800 |
1000×1000 |
1200×1200 |
1500×1200 |
|
Peak Acc. (g) |
Half-Sine |
5-2.5k |
5-2k |
5-1500 |
10-750 |
10-600 |
10-450 |
10-400 |
10-300 |
10∼300 |
10∼250 |
10∼150 |
Post-Peak Sawtooth |
10-200 |
10-100 |
10-50 |
|||||||||
Trapezoid |
\ |
15-200 |
15-100 |
15-60 |
15-50 |
|||||||
Pulse Duration (ms) |
Half-Sine |
0.5∼40 |
1∼40 |
0.6∼60 |
1.5∼60 |
2∼60 |
2.5∼60 |
3∼60 |
3.5∼60 |
4∼60 |
4.5∼60 |
6∼60 |
Post-Peak Sawtooth |
3∼18 |
6∼18 |
||||||||||
Trapezoid |
\ |
3∼18 |
6∼18 |
|||||||||
Bump Waveform |
Half sine wave |
|||||||||||
Bump Peak Acceleration (g) |
4~150 |
5∼100 |
||||||||||
Bump Pulse Duration (ms) |
2~30 |
3~30 |
||||||||||
Overall Dimension (mm) |
1000×1000 ×2100 |
1200×1000 ×2200 |
1400×1200 ×2300 |
1600×1400 ×2300 |
1700×1500 ×2300 |
1700×1500 ×2300 |
1900×1500 ×2450 |
1900×1500 ×2450 |
2000×1500 ×2450 |
1900×1800 ×2550 |
2200×1800 ×2550 |
|
Weight (kg) |
1300 |
2300 |
3000 |
4000 |
4500 |
4500 |
5000 |
5200 |
5600 |
6200 |
7300 |
|
Bump Rate (Times/Min) |
10~120 |
|||||||||||
Environment |
Temperature range 0 ~ 40℃; Humidity ≤ 80%, non-condense |
|||||||||||
Power |
AC220V±10%, 50Hz |
|||||||||||
Air source |
≤0.8MPa |
|||||||||||
Floor |
Foundation-free, the cement floor shall be leveled and the working distance of 800 ~ 1000mm shall be reserved around the equipment |
|||||||||||
Standards |
MIL-STD-810F IEC68-2-27 MIL-STD-202 MIL-STD-750 MIL-STD-883 UN38.3 IEC62281 IEC62133-2 UL2054 IEEE1625 SAEJ2929 IEC62660-2 ISO12405-3 UL2580 |
精選產品
-
KRD30 Constant Acceleration Tester (Box Type)
-
KRD15 Pneumatic Horizontal Shock Response Spectrum Test System
-
KRD14 Pneumatic Vertical Shock Response Spectrum Test System
-
KRD20 Pneumatic Bump Test Machine
-
KRD17 Pneumatic Bidirectional Vertical Shock Test System
-
KRD16 High Impact Shock Test System
-
KRD13 High Energy Shock Test System